Category: Hydration
Type: Lotion (CEB-N 4.25%)
Batch Size: 100 g Example
Product Description
A lightweight, fast-absorbing lotion designed for warm climates and daily use. This formulation minimizes oil content while maximizing hydration through humectants and aloe, providing a refreshing skin feel without residue.
🧪 Formula (100.00%)
Phase A
| ✔ | Ingredient | % | Grams | Measure |
| ☐ | CEB-N (Cetearyl Alcohol, Xanthan Gum, Polyglyceryl-10 Stearate, Glyceryl Monostearate) | 4.25% | 4.25 g | ~1 tbsp (slightly under) |
| ☐ | 🟢 MCT Oil (Caprylic/Capric Triglyceride) | 6.00% | 6.00 g | ~1 tsp |
| ☐ | 🟡 Glycerin (Vegetable Derived Humectant) | 5.00% | 5.00 g | 1 tsp |
| ☐ | 🟡 Aloe Vera Extract (Aloe barbadensis) | 4.00% | 4.00 g | ~3/4 tsp |
| ☐ | 🟡 Sodium Hyaluronate (High Molecular Weight) | 0.20% | 0.20 g | pinch |
| ☐ | 🟣 Preservative (Phenoxyethanol & Ethylhexylglycerin – PE9010) | 1.00% | 1.00 g | ~1/5 tsp |
Phase B (Water Phase)
| ✔ | Ingredient | % | Grams | Measure |
| ☐ | Deionized Water (Aqua) | 84.45% | 84.45 g | ~1/3 cup |
Phase C (Cool Down Phase)
| ✔ | Ingredient | % | Grams | Measure |
| ☐ | 🔵 Fresh Linen Fragrance Oil | 0.30% | 0.30 g | ~6 drops |
🧠 Ingredient Function Overview
- 🟢 MCT Oil – Ultra-light emollient that improves spreadability without leaving residue
- 🟡 Glycerin – Primary humectant for moisture retention
- 🟡 Aloe Vera Extract – Provides soothing hydration and skin comfort
- 🟡 Sodium Hyaluronate – High-efficiency hydration agent enhancing water retention
- 🔵 Fresh Linen Fragrance Oil – Clean, refreshing scent ideal for warm-weather formulations
- 🟣 Preservative System – Protects against microbial contamination
- ⚫ CEB-N System – Stabilizes the emulsion and provides a smooth, consistent texture
📏 Batch Size & Measurement System
This formula is based on a 100 g batch and may be scaled proportionally.
Approximate Conversions
Liquids:
- 1 teaspoon ≈ 5 g
- 1 tablespoon ≈ 15 g
- 1/4 cup ≈ 60 g
- 1/3 cup ≈ 80 g
Powders:
- 1 teaspoon ≈ 2–5 g
- ≤0.5% additions = pinch
⚠️ Measurements are approximate. A digital scale is recommended for accuracy.
⚙️ Procedure (Final Universal Method — Phase Integrated)
1. Prepare Equipment
Use a clean, heat-safe mixing vessel and sanitize all utensils
2. Combine Phase A
Add all Phase A ingredients:
- CEB-N
- 🟢 Emollients
- 🟡 Actives / humectants
- 🟣 Preservative
👉 Do NOT heat
3. Prepare Phase B (Water Phase)
Heat Phase B to boiling (~100°C)
4. Form Emulsion
Slowly add Phase B into Phase A while mixing continuously
Mix using hand stirring or low-speed blending
5. Cool Down
Continue mixing while cooling
Avoid high shear or homogenization
6. Add Phase C (<45°C)
Add:
- 🔵 Fragrance oil
Mix thoroughly
7. Final Mix & Fill
Mix until uniform
Transfer to containers
Allow to cool before sealing
⚠️ Safety & Handling
- Use heat-safe containers
- Wear gloves and eye protection (PPE)
- Work in a well-ventilated area
- Avoid inhalation of powders and fragrance oils
- Handle actives carefully
- Patch testing recommended
⚠️ Disclaimer
All formulas can be adjusted to individual preference; however, any adjustments should consider ingredient compatibility, functionality, and recommended usage levels.
Refer to Safety Data Sheets (SDS) for all ingredients to ensure proper handling and safe use.
Always wear appropriate Personal Protective Equipment (PPE), including gloves and eye protection, when handling raw materials.
Users are responsible for ensuring compliance with applicable local regulations, labeling requirements, and safety standards for finished products.