Vitamin E Protective Lotion (Naturally Derived)
Category: Protection
Type: Lotion (CEB-N 4.50%)
Batch Size: 100 g Example
Product Description
A protective, antioxidant-rich lotion designed to support skin against environmental stressors. This formulation utilizes Vitamin E and lightweight emollients to enhance skin conditioning while helping maintain moisture balance and overall skin health.
🧪 Formula (100.00%)
Phase A
| ✔ | Ingredient | % | Grams | Measure |
| ☐ | CEB-N (Cetearyl Alcohol, Xanthan Gum, Polyglyceryl-10 Stearate, Glyceryl Monostearate) | 4.50% | 4.50 g | ~1 tsp |
| ☐ | 🟢 Sunflower Oil (Helianthus annuus) | 7.00% | 7.00 g | ~1.5 tsp |
| ☐ | 🟢 MCT Oil (Caprylic/Capric Triglyceride) | 3.00% | 3.00 g | ~1/2 tsp |
| ☐ | 🟡 Glycerin (Vegetable Derived Humectant) | 4.00% | 4.00 g | ~3/4 tsp |
| ☐ | 🟡 Vitamin E (Mixed Tocopherols) | 1.00% | 1.00 g | ~1/5 tsp |
| ☐ | 🟡 Sodium Hyaluronate (High Molecular Weight) | 0.25% | 0.25 g | pinch |
| ☐ | 🟣 Preservative (Phenoxyethanol & Ethylhexylglycerin – PE9010) | 1.00% | 1.00 g | ~1/5 tsp |
Phase B (Water Phase)
| ✔ | Ingredient | % | Grams | Measure |
| ☐ | Deionized Water (Aqua) | 79.95% | 79.95 g | ~1/3 cup |
Phase C (Cool Down Phase)
| ✔ | Ingredient | % | Grams | Measure |
| ☐ | 🔵 Soft Fresh Fragrance Oil | 0.30% | 0.30 g | ~6 drops |
🧠 Ingredient Function Overview
- 🟢 Sunflower Oil – Provides lightweight emolliency and supports skin conditioning
- 🟢 MCT Oil – Enhances spreadability and reduces greasy feel
- 🟡 Glycerin – Draws moisture into the skin for hydration
- 🟡 Vitamin E (Tocopherols) – Antioxidant that helps protect skin from oxidative stress
- 🟡 Sodium Hyaluronate – Supports hydration through moisture retention
- 🔵 Fragrance Oil – Adds a clean, subtle sensory profile
- 🟣 Preservative System – Ensures microbial stability
- ⚫ CEB-N System – Provides stable emulsification and smooth texture
📏 Batch Size & Measurement System
This formula is based on a 100 g batch and may be scaled proportionally.
Approximate Conversions
Liquids:
1 teaspoon ≈ 5 g
1 tablespoon ≈ 15 g
1/3 cup ≈ 80 g
Powders:
≤0.5% additions = pinch
⚠️ Measurements are approximate. A digital scale is recommended.
⚙️ Procedure (Final Universal Method — Phase Integrated)
- Combine Phase A (no heat)
- Heat Phase B to boiling (~100°C)
- Slowly add Phase B into Phase A while mixing
- Continue mixing and allow to cool
- Add Phase C below 45°C
- Mix thoroughly → fill → allow to set
⚠️ Safety & Handling
- Use heat-safe containers
- Wear gloves and eye protection (PPE)
- Work in a well-ventilated area
- Avoid inhalation of powders and fragrance oils
- Handle actives carefully
- Patch testing recommended
⚠️ Disclaimer
All formulas can be adjusted to individual preference; however, any adjustments should consider ingredient compatibility, functionality, and recommended usage levels.
Refer to Safety Data Sheets (SDS) for all ingredients to ensure proper handling and safe use.
Always wear appropriate Personal Protective Equipment (PPE), including gloves and eye protection, when handling raw materials. Users are responsible for ensuring compliance with applicable local regulations, labeling requirements, and safety standards for finished products